Free Shipping Worldwide

Introduction of MANI DIA-BURS


Wide variety of diamond burs with a code indicating the shape of the bur.

Color Coding

Color code indication is provided at the end of working part ( ), according to the size ofdiamond grit conforming to the specification.


MANI coding system reflects shapes of burs. The contour and sizes could be imagined by MANI nomenclature since ISO numbers arealso indicated. ●TF/Taper Flat End ●TR/Taper Round End ●TC/Taper Conical End ●FO/Flame Ogival End ●SF/Straight Flat End ●SO/Straight Ogival End ●SR/Straight Round End ●RS/Rounded Shoulder ●EX/Special (Extra) Shape ●BR/Ball Round Type ●BC/Ball Collar Type ●DI/Double Inverted Cone ●SI/Single Inverted Cone ●WR/Wheel Round Edge ●CR/CR Inlay Preparation Dia-Burs ●CD/Children's Dentistry Dia-Burs ●S/Short Shank ●SS/Super Short Shank ●C/Coarse ●F/Fine ●EF/Extra Fine

High Quality Control

Laser measurement  cutting test and strength test for each lot are performed. All products comply with our own standards whichare far more strict than ISO standards.

Before using MANI DIA-BURS, please see the instruction as indicated below.

●For dental use only.●Non-sterile.●Insert the shank into the handpiece according to the instruction of the handpiece manufacturer.Insertion should be the full length.●Beforeuse, run the instruments to make sure there is no descentering. If the instruments become bent, be sure to remove them from anyfurther use.●Please always use spray. APlentiful water supply is necessary to maintain long-lived performance and also to prevent loading and pulpitis.●Handle with care not to put excessive load. Pressure should be20 to 50p for all instruments with diameter up to 023.●Use below max. allowable r.p.m. of each instrument, see chart above, to avoid a possibility of being injured due tobreakage.●Avoid levering, tilting, twisting and jamming motion. Do not work with a pulling motion.●Wear a safety glasses and/or facemask to protect from being injured.●Practicable for using auto-clave. Do not use high pressure steam sterilizer which heats more than 200°Cincluding drying process.●After using, follow appropriate treatment as themedical waste.

Buy It Now:

Next Post

  • Yinzhong Xu
Comments 0
Leave a comment
Your Name:*
Email Address:*
Message: *

Please note: comments must be approved before they are published.

* Required Fields